Dealer program now accepting applications — apply online in minutes. Learn more

Step one: choose the right length

Measure once, order the shortest mount that reaches, and the installation is straight.

Every opener mount and track set is sold in one of four maximum lengths: 12, 19, 24 and 29 inches. The right one is the shortest that reaches the mounting point with the mount fully seated — not the longest that fits in the box.

Which series goes where

SeriesAttaches toLengths available
TMS / TMX / TMLOverhead opener motor flanges12, 19, 24, 29 in.
TMMRTMarantec-style opener motor flanges12, 19, 24 in.
TMGTOverhead door track, one set per door12, 19, 24, 29 in.

How to measure

  1. Park the door closed and isolate the opener from power.
  2. Hold a tape from the ceiling structure down to the opener flange (or to the track mounting point).
  3. Measure to where the mount attaches, not to the top of the motor casing.
  4. Choose the shortest length that is equal to or greater than that measurement.

If the measurement falls between lengths

Take the next length up and adjust at the mounting bracket, not with spacers or stacked washers. If the gap is more than an inch, the ceiling structure may not be where the opener wants to hang — in that case, send us a photograph and we will tell you which series suits the job.

Track sets are per door

A TMGT set supports the overhead door track for one door. Two doors need two sets. The set includes the chrome ring and the mounting hardware; the track itself is part of the door.

Shop by length Installation guides